HomeMy WebLinkAboutMSDSMATERIAL SAFETY DATA SHEET
Page 1 of 4
WOW ALL-PURPOSE
Date Prepared: Monday, January 30, 2006
SECTION 1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION
Product Name: WOW All Purpose Cleaner
Chemical Family: Compounded Liquid Surfactant
Product Description: Compounded alkaline surfactant
CONTACT ADDRESS:
SKY BLUE INDUSTRIES
760 W EXCHANGE RD, OODEN, UTAH 84401-1208
EMERGENCY TELEPHONE NUMBERS:
CHEMTREC (800) 424-9300 (24 Hours) (For Emergency Use Only)
SKY BLUE IND (801) 394-2808 (7am - 5pm M-Th) (Sam - 12pm F)
SECTION 2 COMPOSITION / INFORMATION ON INGREDIENTS
NO HAZARDOUS INGREDIENTS
SECTION 3 HAZARDS IDENTIFICATION
Emergency Overview
Warning Irritating to eyes, skin, mucous membranes, and upper respiratory tract. Harmful by ingestion.
Skin: Irritant to skin.
Eye: Severe irritant to eyes.
Ingestion: Harmful. May cause gastrointestinal distress, nausea, and vomiting.
Inhalation: May cause slight irritation to respiratory system.
SECTION 4 FIRST AID MEASURES
Eye: Flush with large amounts of running water for 15 minutes. Seek medical advice if redness or swelling
develops.
Skin: Wash exposed area with soap and water. Seek medical advice if symptoms develop.
Ingestion: Do NOT induce vomiting, if victim is conscious give water. Get medical attention. Never give an
unconscious person anything by mouth.
Inhalation: Remove to fresh air. If not breathing, apply artificial respiration. Seek medical advice.
From:sky blue 18013946134 12/17/2009 16:21 #739 P.002/004
MATERIAL SAFETY DATA SHEET
Page 2 of 4
WOW ALL-PURPOSE
Date Prepared: Monday, January 30, 2006
SECTION 5 FIRE FIGHTING MEASURES
FLAMABLE PROPERTIES
Flash Point: N/E Method: N/E
Flammable Limits: N/E
Extiguishig Media: Use foam, dry chemical, or water spray to extinguish fire
Protection of Firefighter: Wear full bunker gear, including a positive pressure self-contained breathing
apparatus.
Fire and Explosion Hazards: Smoke, fumes, oxides of carbon., oxides of phosphorous., and oxides of sulfur.
SECTION 6 ACCIDENTAL RELEASE MEASURES
Land Spill
Prevent additional discharge of material if possible to do so without hazard. For small spills impliment clean up
procedures; For large spills impliment clean up procedures. Also, if this product is subject to CERCLA reporting (
see section 15 regulatory information) notify the national response center.
Clean Up Procedures
- Contain spill and ventilate area. Absorb on inert media.
- Recover by pumping or with a suitable absorbent.
- Consult an expert on disposal of recovered material and ensure conformity to local disposal regulations.
- Wash walking surfaces with detergent and water.
SECTION 7 STORAGE AND HANDLING
Storage and Handling:
Wash hands before eating. Avoid contact with eyes, skin and clothing. Keep containers closed when not in use. Avoid
overheating and freezing.
SECTION 8 EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Controls
The use of mechanical dilution ventilation is recommended wyhen ever this product is used in a
confined space, is heated above ambient temperatures, or is agitated.
EXPOSURE LIMITS
NIOSHPEL ACGIHTLV
ppm mg/m3 ppm mg/m3
NONE 0 0 0 0
From:sky blue 18013946134 12/17/2009 16:21 #739 P.003/004
MATERIAL SAFETY DATA SHEET
Page 3 of 4
WOW ALL-PURPOSE
Date Prepared: Monday, January 30, 2006
PERSONAL PROTECTION:
For open systems where contact is likely, wear safety glasses with side shields, long sleeves, and chemical
resistant gloves. Where contact may occur, wear safety glasses with side shields. Where concentrations in air
may exceed the TLV, work practice or other means of exposure reduction are not adequate, NIOSH/MSHA
approved respirators may be necessary to prevent overexposure by inhalation.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Specific Gravity:
1.03
Vapor Density:
N/E
Solubility In Water:
Soluable
Freezing/Melting Point, F:
N/E
Appearance:
Clear green liquid
Odor:
detergent
Evaporation Rate, n-Bu AcetateĀ1:
<1
Boiling Point, F:
N/E
pH ofl %Solution: 9.8
SECTION 10 STABILITY AND REACTIVITY
Stability:
Stable
Conditions to Avoid Istability:
Acids and Oxidizers
Hazardous Polymerization:
Will not occur
Conditions to Avoid Hazardous Polymerization:
Extreme heat, Ignition sources
Materials and Conditionsto AvoidIncompatability:
Not Established
Hazardous Decomposition Products:
None
SECTION 11 TOXICOLOGICAL INFORMATION
Please refer to section 3 for available information on potential health effects.
SECTION 12 ECOLOGICAL INFORMATION
No specific ecological data are available for this product. Please refer to section 6 for information regaurding accidental
releases and section 15 for regulatory reporting.
From:sky blue 18013946134 12/17/2009 16:21 #739 P.004/004
MATERIAL SAFETY DATA SHEET
Page4 of 4
WOW ALL-PURPOSE
Date Prepared: Monday, January 30, 2006
SECTION 13 DISPOSAL CONSIDERATIONS
Please refer to section 5, 6, and 15 for disposal and regulatory information.
SECTION 14 TRANSPORTATION INFORMATION
Proper Shipping Name Hazardous Clas Packaging Group ID #
Not Regulated
SECTION 15 REGULATORY INFORMATION
Regulatory Information
CERCLA:
Reportable Quantity from release or spill: 5,000 Ib. Sodium phosphate tribasic or approx. 475,000 Ib. Product
TSCA CHEMICAL SUBSTANCE INVENTORY: Components of this product are listed on the TSCA Inventory.
SECTION 16 OTHER INFORMATION
HAZARD RATING SYSTEM:
This information is for the identification of the fire hazards for materials for the organizations listed below:
National Paint Coatings Association's (NPCA)
Hazardous Materials Identification System (HMIS)
National Fire Protection Association (NFPA)
NPCA-HCMS NFPA KEY
Health 1 1 4 = Severe
Flammability 1 1 3 = Serious
Reactivity 0 0
2 = Moderate
1 = Slight
0 = Minimal
The data contained herein is offered in good faith as typical values and not as product specification. No warranty, either expressed or
implied, is made. The recommended handling procedures are believed to be generally applicable. However, each user should review
these recommendations in the specific content of the intended use.
*** END OF MSDS ***