The URL can be used to link to this page

Home My WebLink AboutIron Stone Acrylic SealerIron Stone Acrylic Seal Version Number: 1 Preparation date: 2014-06-23 SAFETY DATA SHEET 1. IDENTIFICATION Product name:Iron Stone Acrylic Seal Product Code:4006110, 5104837 SDS #:MS0800399 Recommended use:• Industrial/Institutional • Floor care Uses advised against:Uses other than those identified are not recommended Emergency telephone number:1-800-851-7145 (U.S.); 1-651-917-6133 (Int'l) 2. HAZARDS IDENTIFICATION Classification for the undiluted product This product is not classified as hazardous according to OSHA 29CFR 1910.1200 (HazCom 2012-GHS) and current Canadian Controlled Products Regulations (CPR). Precautionary Statements May be mildly irritating to eyes and skin. In case of contact, immediately flush with plenty of water. If irritation occurs and persists, get medical attention. Health hazards not otherwise classified (HHNOC) - Not applicable Physical hazards not otherwise classified (PHNOC) - Not applicable 3. COMPOSITION/INFORMATION ON INGREDIENTS Classified Ingredients Ingredient(s)CAS #Weight % Diethylene glycol monoethyl ether 111-90-0 3% - < 5% Tributoxyethyl phosphate 78-51-3 1% - < 3% Manufacturer, importer, supplier:US HeadquartersDiversey, Inc. 8310 16th St. Sturtevant, Wisconsin 53177-1964 Phone: 1-888-352-2249 MSDS Internet Address: www.diversey.com Canadian Headquarters Diversey, Inc. - Canada2401 Bristol Circle Oakville, Ontario L6H 6P1 Phone: 1-800-668-3131 Classification for the diluted product @ RTU This product is intended to be used neat. Iron Stone Acrylic Seal 1 of 5 Precautionary Statements Acrylic polymer Proprietary > 0.1% - < 1% *Exact percentages are being withheld as trade secret information 4. FIRST AID MEASURES Undiluted Product: Eyes: In case of contact, immediately flush with plenty of water. If irritation occurs and persists, get medical attention. Skin: In case of contact, immediately flush with plenty of water. If irritation occurs and persists, get medical attention. Inhalation: No specific first aid measures are required. Ingestion: Rinse mouth with water. Most Important Symptoms/Effects: No information available. Immediate medical attention and special treatment needed Not applicable. Aggravated Medical Conditions: None known. 5. FIRE-FIGHTING MEASURES Specific methods:No special methods required Suitable extinguishing media:The product is not flammable. Extinguish fire using agent suitable for surrounding fire. Specific hazards:Not applicable. Special protective equipment for firefighters: As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear. Extinguishing media which must not be used for safety reasons: No information available. 6. ACCIDENTAL RELEASE MEASURES Personal precautions:No information available. Environmental precautions and clean-up methods: Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal. Use a water rinse for final clean-up. 7. HANDLING AND STORAGE Handling: Avoid contact with skin and eyes. FOR COMMERCIAL AND INDUSTRIAL USE ONLY. Storage: Protect from freezing. Keep tightly closed in a dry, cool and well-ventilated place. KEEP OUT OF REACH OF CHILDREN. Aerosol Level (if applicable) : Not applicable 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Exposure Guidelines:This product, as supplied, does not contain any hazardous materials with occupational exposure limits established by the region specific regulatory bodies. Ingredient(s)CAS #ACGIH OSHA Diethylene glycol monoethyl ether 111-90-0 -- Tributoxyethyl phosphate 78-51-3 -- Acrylic polymers Proprietary -- Undiluted Product: Engineering measures to reduce exposure:No special ventilation requirements General room ventilation is adequate Personal Protective Equipment Eye protection:No special requirements under normal use conditions. Diluted Product: Iron Stone Acrylic Seal 2 of 5 Eyes: See undiluted product information above. Skin: See undiluted product information above. Inhalation: See undiluted product information above. Ingestion: See undiluted product information above. Hand protection:No special requirements under normal use conditions. Skin and body protection:No special requirements under normal use conditions. Respiratory protection:No special requirements under normal use conditions. Hygiene measures:Handle in accordance with good industrial hygiene and safety practice. 9. PHYSICAL AND CHEMICAL PROPERTIES: Explosion limits: - upper: Not determined - lower: Not determined * - Title 17, California Code of Regulations, Division 3, Chapter 1, Subchapter 8.5, Article 2, Consumer Products, Sections 94508 10. STABILITY AND REACTIVITY Reactivity:Not Applicable Stability:The product is stable Hazardous decomposition products:None reasonably foreseeable. Materials to avoid:None known. Conditions to avoid:No information available. 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure: Eye contact, Skin contact, Inhalation Delayed, immediate, or chronic effects and symptoms from short and long-term exposure Skin contact: May be mildly irritating to skin. Symptoms may include redness and/or transient discomfort. Eye contact: May be mildly irritating to eyes. Symptoms may include redness, watering and/or transient discomfort. Ingestion: No information available. Inhalation: No information available. Sensitization: No known effects. Numerical measures of toxicity 12. ECOLOGICAL INFORMATION Ecotoxicity: No information available. Persistence and Degradability: No information available. Diluted Product: This product is intended to be used neat. Personal Protective Equipment Eye protection:No special requirements under normal use conditions. Hand protection:No special requirements under normal use conditions. Skin and body protection:No special requirements under normal use conditions. Respiratory protection:No special requirements under normal use conditions. Hygiene measures:Handle in accordance with good industrial hygiene and safety practice. Physical State: Liquid Color: Opaque, White Evaporation Rate: No information available Odor: Solvent Ammonia Odor threshold: No information available.Boiling point/range: Not determined Melting point/range: Not determined Decomposition temperature: Not determined Autoignition temperature: No information available Solubility: Dispersible Solubility in other solvents: No information available Relative Density (relative to water): 1.024 Density: 8.54 lbs/gal 1.024 Kg/L Vapor density: No information available Bulk density: No information available Vapor pressure: No information available. Flash point: > 200 °F > 93.3 °C Partition coefficient (n-octanol/water): No information available Dilution Flash Point: > 200 °F > 93.3 °C Viscosity: No information available Elemental Phosphorus: 0.14 % by wt.VOC: 0.99 % * pH: 8.2 VOC % by wt. at use dilution 0.99 % * Iron Stone Acrylic Seal 3 of 5 Dilution pH: 8.2 @ RTU Flammability (Solid or Gas): Not applicable Metal Corrosion Not determined Bioaccumulation: No information available. 13. DISPOSAL CONSIDERATIONS Waste from residues / unused products: This product, as sold, if discarded or disposed, is not a hazardous waste according to Federal regulations (40 CFR 261.4 (b)(4)). Dispose in compliance with all Federal, state, provincial, and local laws and regulations. Contaminated Packaging: Do not re-use empty containers. RCRA Hazard Class (undiluted product): Not Regulated 15. REGULATORY INFORMATION International Inventories at CAS# Level All components of this product are listed on the following inventories: U.S.A. (TSCA), Canada (DSL/NDSL). U.S. Regulations California Proposition 65: This product is not subject to the reporting requirements under California's Proposition 65. RIGHT TO KNOW (RTK) Ingredient(s)CAS #MARTK:NJRTK:PARTK:RIRTK: Water 7732-18-5 ---- Acrylic Polymer Proprietary ---- Diethylene glycol monoethyl ether 111-90-0 -X -- Acrylic polymers Proprietary ---- Tributoxyethyl phosphate 78-51-3 ---- CERCLA/ SARA Ingredient(s)CAS #Weight %CERCLA/SARA RQ (lbs)Section 302 TPQ (lbs)Section 313 Diethylene glycol monoethyl ether 111-90-0 3% - < 5%X Ingredient(s)CAA HAP CAA ODS CWA Priority Pollutants Diethylene glycol monoethyl ether X SARA 311/312 Hazard Categories Immediate:- Delayed:- Fire:- Reactivity:- Sudden Release of Pressure:- Canada WHMIS hazard class: Non-controlled. 16. OTHER INFORMATION NFPA Health 1 Flammability 0 Instability 0 Version Number: 1 14. TRANSPORT INFORMATION DOT/TDG/IMDG: Please refer to the Diversey HazMat Library, only available through Internet Explorer, http://naextranet.diversey.com/dot/, for up to date shipping information. DOT (Ground) Bill of Lading Description: FLOOR WAXES OR SEALANTS Iron Stone Acrylic Seal 4 of 5 IMDG (Ocean) Bill of Lading Description: FLOOR WAXES OR SEALANTS Preparation date: 2014-06-23 Reason for revision:Not applicable Prepared by:NAPRAC Additional advice: Iron Stone Acrylic Seal 5 of 5 • Does not contain an added fragrance • This product has been classified in accordance with hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations Notice to Reader: This document has been prepared using data from sources considered technically reliable. It does not constitute a warranty, express or implied, as to the accuracy of the information contained within. Actual conditions of use and handling are beyond seller's control. User is responsible to evaluate all available information when using product for any particular use and to comply with all Federal, State, Provincial and Local laws and regulations.