Loading...
HomeMy WebLinkAboutPurell Professional Surface DisinfectantSAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 1 / 10 SECTION 1. IDENTIFICATION Product name : PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT USE ONLY Manufacturer or supplier's details Company name of supplier : GOJO Industries, Inc. Address : One GOJO Plaza, Suite 500 Akron, Ohio, 44311 Telephone : 1 (330) 255-6000 Emergency telephone number : 1-800-424-9300 CHEMTREC SECTION 2. HAZARDS IDENTIFICATION GHS Classification Flammable liquids : Category 3 GHS Label element Hazard pictograms : Signal word : Warning Hazard statements : H226 Flammable liquid and vapour. Precautionary statements : Prevention: P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking. P233 Keep container tightly closed. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. Response: P370 + P378 In case of fire: Use dry sand, dry chemical or alco- hol-resistant foam for extinction. Storage: P403 + P235 Store in a well-ventilated place. Keep cool. Disposal: P501 Dispose of contents/ container to an approved waste dis- posal plant. Other hazards None Known SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 2 / 10 SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS Hazardous components Chemical Name CAS-No. Concentration (%) Ethyl Alcohol 64-17-5 >= 20 - < 35 Isopropyl Alcohol 67-63-0 >= 1 - < 5 SECTION 4. FIRST AID MEASURES General advice : In the case of accident or if you feel unwell, seek medical ad- vice immediately. If inhaled : If sensitivity occurs, remove to fresh air. If symptoms persist, call a physician. In case of skin contact : If sensitivity occurs, wash with soap and water. Get medical attention if irritation develops and persists. In case of eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Seek medical attention. If swallowed : Rinse mouth with water. Obtain medical attention. Protection of first-aiders : First Aid responders should pay attention to self-protection and use the recommended protective clothing SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media : Water spray Alcohol-resistant foam Carbon dioxide (CO2) Dry chemical Unsuitable extinguishing media : High volume water jet Specific hazards during fire- fighting : Do not use a solid water stream as it may scatter and spread fire. Cool closed containers exposed to fire with water spray. Flash back possible over considerable distance. May form explosive mixtures in air. Exposure to decomposition products may be a hazard to health. Specific extinguishing meth- : Use extinguishing measures that are appropriate to local cir- SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 3 / 10 Components CAS-No. Value type (Form of exposure) Control parame- ters / Permissible concentration Basis Ethyl Alcohol 64-17-5 TWA 1,000 ppm 1,900 mg/m3 NIOSH REL TWA 1,000 ppm 1,900 mg/m3 OSHA Z-1 STEL 1,000 ppm ACGIH Isopropyl Alcohol 67-63-0 TWA 200 ppm ACGIH ods cumstances and the surrounding environment. Use water spray to cool unopened containers. Further information : Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. Special protective equipment for firefighters : In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. SECTION 6. ACCIDENTAL RELEASE MEASURES Personal precautions, protec- tive equipment and emer- gency procedures : Use personal protective equipment. Ensure adequate ventilation. Remove all sources of ignition. Material can create slippery conditions. Environmental precautions : Discharge into the environment must be avoided. Prevent further leakage or spillage if safe to do so. Retain and dispose of contaminated wash water. Methods and materials for containment and cleaning up : Non-sparking tools should be used. Soak up with inert absorbent material. Keep in suitable, closed containers for disposal. Clean contaminated floors and objects thoroughly while ob- serving environmental regulations. SECTION 7. HANDLING AND STORAGE Advice on safe handling : Avoid contact with eyes. Conditions for safe storage : No smoking. Take measures to prevent the build up of electrostatic charge. Keep container tightly closed in a dry and well-ventilated place. Store in accordance with the particular national regulations. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Components with workplace control parameters SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 4 / 10 STEL 400 ppm ACGIH TWA 400 ppm 980 mg/m3 NIOSH REL ST 500 ppm 1,225 mg/m3 NIOSH REL TWA 400 ppm 980 mg/m3 OSHA Z-1 Biological occupational exposure limits Components CAS-No. Control parameters Biological specimen Sam- pling time Permissible concentra- tion Basis Isopropyl Alcohol 67-63-0 Acetone Urine End of shift at end of work- week 40 mg/l ACGIH BEI Personal protective equipment Respiratory protection : No personal respiratory protective equipment normally re- quired. Eye protection : No special measures necessary provided product is used correctly. Skin and body protection : No special measures necessary provided product is used correctly. Protective measures : Choose body protection in relation to its type, to the concen- tration and amount of dangerous substances, and to the spe- cific work-place. Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance : liquid Colour : colourless Odour : alcohol-like Odour Threshold : No data available pH : 12.6 - 12.9, (24 °C) SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 5 / 10 Melting point/freezing point : No data available Initial boiling point and boiling range : 77 °C Flash point : 30.8 °C Method: Pensky-Martens closed cup Evaporation rate : No data available Flammability (solid, gas) : Not applicable Upper explosion limit : 19 %(V) Lower explosion limit : 3.3 %(V) Vapour pressure : No data available Relative vapour density : No data available Relative density : No data available Density : 0.952 g/cm3 Solubility(ies) Water solubility : soluble Partition coefficient: n- octanol/water : Not applicable Auto-ignition temperature : not determined Thermal decomposition : The substance or mixture is not classified self-reactive. Viscosity Viscosity, dynamic : 2.6 mPa.s Explosive properties : Not explosive Oxidizing properties : The substance or mixture is not classified as oxidizing. SECTION 10. STABILITY AND REACTIVITY Reactivity : Not classified as a reactivity hazard. Possibility of hazardous reac- tions : Vapours may form explosive mixture with air. Conditions to avoid : Heat, flames and sparks. Incompatible materials : Oxidizing agents Hazardous decomposition products : No hazardous decomposition products are known. SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 6 / 10 SECTION 11. TOXICOLOGICAL INFORMATION Information on likely routes of exposure Inhalation Skin contact Eye contact Acute toxicity Not classified based on available information. Skin corrosion/irritation Not classified based on available information. Serious eye damage/eye irritation Not classified based on available information. Respiratory or skin sensitization Skin sensitization: Not classified based on available information. Respiratory sensitization: Not classified based on available information. Germ cell mutagenicity Not classified based on available information. Carcinogenicity Not classified based on available information. IARC No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. OSHA No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcino- gen by OSHA. NTP No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. Reproductive toxicity Not classified based on available information. STOT - single exposure Not classified based on available information. STOT - repeated exposure Not classified based on available information. SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 7 / 10 Class : 3 Packing group : III Labels : 3 EmS Code : F-E, S-D Aspiration toxicity Not classified based on available information. SECTION 12. ECOLOGICAL INFORMATION Ecotoxicity: No information available on product Persistence and degradability: No information available on product Bioaccumulative potential: No information available on product Moblity in soil: No information available on product Other adverse effects: No information available on product Product: Regulation 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B). SECTION 13. DISPOSAL CONSIDERATIONS Disposal methods Waste from residues : Dispose of in accordance with local regulations. SECTION 14. TRANSPORT INFORMATION International Regulation IATA-DGR UN/ID No. : UN 1987 Proper shipping name : Alcohols, n.o.s. (Ethanol, Propan-2-ol) Class : 3 Packing group : III Packing instruction (cargo aircraft) : 366 IMDG-Code UN number : UN 1987 Proper shipping name : ALCOHOLS, N.O.S. (Ethanol, Propan-2-ol) Marine pollutant : no SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 8 / 10 UN/ID/NA number : UN 1987 Proper shipping name : Alcohols, n.o.s. Ethyl Alcohol 64-17-5 29.4 % Isopropyl Alcohol 67-63-0 1.42 % National Regulations 49 CFR (Ethanol, Propan-2-ol) Class : 3 Packing group : III ERG Code : 127 Marine pollutant : no SECTION 15. REGULATORY INFORMATION EPCRA - Emergency Planning and Community Right-to-Know Act CERCLA Reportable Quantity Components CAS-No. Component RQ (lbs) Calculated product RQ (lbs) Potassium Hydroxide 1310-58-3 1000 * *: Calculated RQ exceeds reasonably attainable upper limit. SARA 304 Extremely Hazardous Substances Reportable Quantity This material does not contain any components with a section 304 EHS RQ. SARA 311/312 Hazards : Fire Hazard SARA 302 : No chemicals in this material are subject to the reporting re- quirements of SARA Title III, Section 302. SARA 313 : The following components are subject to reporting levels es- tablished by SARA Title III, Section 313: Isopropyl Alcohol 67-63-0 1.42 % Clean Air Act This product does not contain any hazardous air pollutants (HAP), as defined by the U.S. Clean Air Act Section 12 (40 CFR 61). This product does not contain any chemicals listed under the U.S. Clean Air Act Section 112(r) for Accidental Release Prevention (40 CFR 68.130, Subpart F). The following chemical(s) are listed under the U.S. Clean Air Act Section 111 SOCMI Intermedi- ate or Final VOC's (40 CFR 60.489): This product does not contain any VOC exemptions listed under the U.S. Clean Air Act Section 450. Clean Water Act This product does not contain any toxic pollutants listed under the U.S. Clean Water Act Section 307 The following Hazardous Substances are listed under the U.S. CleanWater Act, Section 311, Ta- ble 116.4A: Potassium Hydroxide 1310-58-3 0.35 % SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 9 / 10 The following Hazardous Chemicals are listed under the U.S. CleanWater Act, Section 311, Table 117.3: Potassium Hydroxide 1310-58-3 0.35 % Massachusetts Right To Know Ethyl Alcohol 64-17-5 20 - 35 % Isopropyl Alcohol 67-63-0 1 - 5 % Pennsylvania Right To Know Water (Aqua) 7732-18-5 70 - 90 % Ethyl Alcohol 64-17-5 20 - 35 % Isopropyl Alcohol 67-63-0 1 - 5 % Potassium Hydroxide 1310-58-3 0.1 - 1 % New Jersey Right To Know Water (Aqua) 7732-18-5 70 - 90 % Ethyl Alcohol 64-17-5 20 - 35 % Isopropyl Alcohol 67-63-0 1 - 5 % California Prop 65 This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other re- productive harm. The components of this product are reported in the following inventories: CH INV : On the inventory, or in compliance with the inventory TSCA : On TSCA Inventory DSL : All components of this product are on the Canadian DSL. AICS : On the inventory, or in compliance with the inventory NZIoC : On the inventory, or in compliance with the inventory ENCS : On the inventory, or in compliance with the inventory ISHL : On the inventory, or in compliance with the inventory KECI : On the inventory, or in compliance with the inventory PICCS : On the inventory, or in compliance with the inventory IECSC : On the inventory, or in compliance with the inventory Inventories AICS (Australia), DSL (Canada), IECSC (China), REACH (European Union), ENCS (Japan), ISHL (Japan), KECI (Korea), NZIoC (New Zealand), PICCS (Philippines), TSCA (USA) SECTION 16. OTHER INFORMATION Further information: SAFETY DATA SHEET PURELL® PROFESSIONAL SURFACE DISINFECTANT – FINISHED PRODUCT Version 1.3 MSDS Number: 400000005189 Revision Date: 03/02/2016 10 / 10 Revision Date : 03/02/2016 The information provided in this Safety Data Sheet is correct to the best of our knowledge, in- formation and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text.